folded dry-filter paper

1. long lifetime 2. large inner cell volume 3. spray booth filter paper

They belong to the category of disposable systems. They are constituted by two layers of cardboard, perforated and pleated, glued together in such a way to create “V”shaped separation cells.

In each of these cells, the holes position within the cell determines a Venturi effect or cyclone which causes the paint particles to deposit at the bottom of the cell. The high efficiency in the separation comes from this Venturi effect where the inertia of the particles is combined with important local variations in speed and direction within the cell itself.

The very long lifetime of pleated cardboard separators comes from its large inner cell volume available for the paint articles within the cell. According to the sprayed product type, impressing results can be achieved: a separation ratio reaching or even over passing 98% and a lifetime multiplied by 5 or 6 in comparison to fibre filters. Moreover, surface clogging does no longer appera, even with dense and sticky products.

It’s geometric design promotes distribution of The frontal speed

Low resistance to air, maximum filter efficiency

Frontal speed 0.5-1 meter per second

Lasts up to six time longer than any other filter type

All type of dry and wet booths can be converted to use pleated cardboard filters

Lower shipping and storage costs

Retention capacity up to 15kg/m2

Standard dimensions width 1m and 1.25m

Other dimensions available on request

Applications:

Paint, polyester, glue, varnish, protection

(wood,coal,insects, etc.)

Optimum efficiency:

25 pleats per meter, evenly distributed

 

 

 

folded dry-filter paper